• Toggle PTT

    From G8MNY@4:902/6 to WW on Sun Jan 12 06:00:50 2025


    (8 Bit ASCII graphics use code page 437 or 850, Terminal Font)

    Hello All,
    Subject: Handsfree ptt-switch for mobile use. ---------------------------------------------------
    Using a vox is not nice in a car because it goes transmitting when it hears sounds.

    Keeping a ptt switch pressed while driving & stearing is also unsafe.

    Thats why I decided to make a large toggle switch on the dashboard with a Red 5mm flashing PTT led & a Mic gain control.

    Construction of toggle switch
    -----------------------------
    I made from double clad PCB about 3 x 6 cm & a microswitch as a nice toggle switch. I did solder a small hange to the PCB& tinned box. And I mounted the microswitch in the metalbox & only the handle pin is pushed when the PCB piece is pushed. I did painted it red hi.
    So I have a nice big easy to push PTT switch.

    Circuit diagram
    ---------------
    I have made a small metalbox with a large pushbutton (S1) on it.
    And a big bright 5mm led.
    The pushbutton is connected to a toggle circuit.
    The output of the toggle circuit is connected to a watchdog circuit which drives a PTT transistor to switch the tranciever, & also the LED flasher circuit.
    Use a 5 mm highbright led so you see it very easy flashing when transmitting without having to look at the tranciever.

    So push S1 & PTT is on for maximal 3-5 minutes & the led flashes. After 3-5 minutes the watchdog switches off the mobileset from transmitting.
    (use 100-220uF).

    So if something happens your rig is not any more transmitting a carrier for hours.

    Mount the small box some where on the dashboard next to the steering wheel so you can easy see the led & push the S1 Switch.

    Further I mounted a small electreet at the sunscreen for getting the sound.

    I also mounted a small mic-preamp with a gain potentiometer in the
    ptt switchbox so I can adjust the audio level when driving.

    PTT toggleswitch
    ----------------
    100nÚÄÄÄÄÂÄÄÄÄÄ1MÄÄ¿
    === ³S1 ³ 10106 or 4093 etc.
    ³ o ³
    ÚÄÄ´ \ ³\ ³ ³\
    _³_ ³1n ÃÄÄ´ `>oÄÄÁÄÄ´ `>oÄÄÂÄÄÄÄ>to A
    === ³ ³/' ³/' ³
    ÀÄÄÄÄÁÄÄÄÄÄ100kÄÄÄÄÄÄÄÄÄÄÙ

    Watchdog & led flasher
    ----------------------
    ÚÄÄÄÂÄÄÄÄÄÄÄÄ +Vcc 9Ä15V
    ³ ³
    A 3M3 _³_ 1N4148
    ³ ³ /_\ ÚÄÄÄÂÄÄÄÄo Ptt
    ³ _ ³ ³ _ 4093 BC547 ³ ³
    ÃÄ´ `\ 100u ³ ³ ÚÄ´ `\ ³/ _³_
    ³ ³ & )oÄ1KÄÄ´ÃÄÁÄÄÄÁÄ´ ³ & )oÄÂÄ10KÄÂÄij /_\
    ÀÄ´_,/ + ÀÄ´_,/' ³ ³ ³\ e ³ 1N4007
    4093 ³ 4K7 ³ ³
    GroundÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ)ÄÄÄÄÄÁÄÄÄÄÁÄÄÄÁÄÄÄÄo
    ³
    ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
    ³ _
    ÀÄÄ´ `\ _ 4093
    ³ & )oÄÄÄ´ `\
    ÚÄÄ´_,/ ³ & )oÄÂÄÄÄ1KÄÄÄ¿
    ³ ÚÄ´_,/ ³+ _³_
    1M 100K === 1uF \_/ð Red 5mm Led.
    ÀÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÙ ÁÄÄÄÄÄÄÄGround

    MicÄampliflier
    --------------
    2 wire electret.
    ÚÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄ560RÄÄ+Vcc 9Ä15V
    ³ ³ 10uF ³+
    4K7 22K ===
    ³ ³ 741 or LF353 _³_
    ³ ÃÄÄÄÄÄÂÄ´\ + 10uF
    ³ u1 ³100p===³ñ`>oÄÂÄ´ÃÄ¿
    ³()ÄÂÁÄ´ÃÄ4K7Ä)ÄÄÄÂÄÁÄ´/' ³ ³
    ³ === +ÚÄÄ´ ³ ³ 5K
    ³ ³1nF === ³ ÀÄ47KÄÄÄÄÄÙ pot<ÄÄo Rig Mic
    ³ ³ 10u³ 22K ³
    ÀÄÄÁÄÄÄÄÄÄÁÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄo

    Gain = about 10x

    I did not wrote the pin numbers of the ic's to it yet.

    73's from PA3BNX@PI8SHB.


    Y don't U send an interesting bul?

    73 de G8MNY @ GB7CIP


    -----------------------------------------
    ARGEN-X BBS - IPV6 TELNET LU9DCE.DYNU.COM -----------------------------------------


    --- Mystic BBS v1.12 A48 (Linux/64)
    * Origin: ARGEN-X BBS (4:902/6)