By G8MNY (Updated Sep 09)
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)
Here is a 3 transistors 6 diodes circuit that is a Voice Operated Tx PTT control as well as an ANTI VOX circuit to stop mis-operation from Rx noise.
SCHEMATIC
ÚÄÄÄÄÄÄ¿ÚÄÄÄ¿ÚÄÄÄÄÄÄÄÄ¿ÚÄÄÄÄÄÄÄÄÄ¿ÚÄÄÄÄÄ¿ÚÄÄÄÄÄÄÄÄÄÄ¿ÚÄÄÄÄÄ¿ÚÄÄÄÄÄÄÄÄ¿
Ä´ RFI ôMICô AF ôSet Decayô Set ô LEVEL ô Set ô AF ÃÄ<Rx Mic³Filter³³AMP³³DETECTOR³³ Time ³³Level³³COMPARITOR³³Level³³DETECTOR³ LS In ÀÄÄÄÄÄÄÙÀÄÄÄÙÀÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÙÀÄÄÄÄÄÂÄÄÄÄÙÀÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÙ
ÚÄÄÄÄÄÁÄÄÄÄ¿
³PTT DRIVERÃÄÄ>PTT
ÀÄÄÄÄÄÄÄÄÄÄÙ
CIRCUIT
VOX TIME VOX GAIN ANTI VOX Smooth
+ÚÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÂÄÄÂÄÄÄÂÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄ<+9-15V 100u === _³_ 2uF³+ ³ ³ ³ ³ +³10u _³_
_³_ D1\_/ === ³ 220K ³ ÚÄ>10K === /_\ D5
ÃÄÄÄÄ¿ ³ === VAR ³ PNP³/e POT ³ ³
³ Ge_³_D2 10K ³u1 ³ 220K<ÄÄÂÄÄ´ ³ ³ D4 ³+10u
10K /_\ Ge³ ³ ³ POT ³ ³\ ÀÄÄÄÁÄ´>ÃÄÁÄ´ÃÄÄ47RÄ< LS
ÚÄÄÄÄÄ´ ³ D3 ³ ³ ³ ³ 10M ³ DETECTOR
³ ÃÄ´ÃÄÁÄ´<ÃÄÁÄÄÁÄÄÄÁÄÄÄÄÙ ÀÄÄÄÄ(ÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄ> PTT
10M ³ u1 DETECTOR ³ ³ ³
³ ³/ 4K7 ³/ BC107 _³_
ÄÄ´ÃÄÁÄðÄ´ BC109 ÃÄÄÄÄ´ NPN /_\ back
u1 FB ³\e 4K7 ³\e D6 ³ EMF
MIC ³ ³ ³ ³
ÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄ< GND
MIC AMP PTT DRIVER
All diodes are 1N4148 or Germanium point contact type.
HOW IT WORKS
The BC109 Mic high gain amp is RF protected by the Ferrite Bead on the base lead. Its' low level output is voltage doubled with Germanium diodes D2 & D3 into double time constants Caps to give fast attach & slow decay time responces. The rectified DC is referenced from the +ve rail less the voltage drop of Silicon diode D1 together with the germanium detector diodes, this makes the Mic Audio detector very sensitive! The voltage is put across the 220K VOX gain pot, & the hang time determined by the 220K decay variable control that discharges the capacitors.
The gain controlled sample of the DC switches on the PNP which turns on the NPN PTT drive transistor, that is protected from rig relay back EMF by D6. The 10M from the PNP base to NPN collector, gives positive feedback hysteresis if needed (SCHMITT) for snap on-off action.
High level LS audio is also voltage doubled with Silicon diodes D4 & 5 to give DC that feeds the ANTI VOX control, this DC is used on the emitter of the PNP to stop the PTT operating from loud RX LS audio that may be heard by the mic.
See my Tech Bul "Rig DC Power & RF Hazards"
Why Don't U send an interesting bul?
73 De John, G8MNY @ GB7CIP
-----------------------------------------
ARGEN-X BBS - IPV6 TELNET LU9DCE.DYNU.COM -----------------------------------------
--- Mystic BBS v1.12 A48 (Linux/64)
* Origin: ARGEN-X BBS (4:902/6)