• Soldering Iron Economiser/Boost

    From G8MNY@4:902/6 to WW on Sun Dec 8 12:00:27 2024


    By G8MNY (Updated Dec 04)
    (8 Bit ASCII graphics use code page 437 or 850, Terminal Font)

    Suitable for 15-60W mains irons only!

    ............S T A N D.................... ....I R O N.........

    Fuse ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
    L o-oÄÄ(ÄÄÄÄÂÄÄÄÄÄÄ¿ +³ 10uF 3 core Boost ³
    1A ³ _³_ _³_ === 350V cable Press SOLDERING
    ³ \_/ /_\ ÀÄÄÄÄÄÄÄ22RÄÄÄÄÄÄÄÄÄÄÄÄ> \ IRON
    ³ ³ ³ 1W ³ ELEMENT
    ÀÄÄÄÄ´ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÙ
    ³ Economize o ³ or 4 core
    4x ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄo <ÄÄÙ with earth
    1N4006_³_ _³_ Normal Gravity
    /_\ \_/ Switch
    N ÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÙ
    E -------------------------------------------------------------------

    When on the stand the mains fed to the iron is half wave only for economiser mode (1/2 power), the iron rest on a suitably mounted stand micro switch that is connected to one of the bridge diodes. When the iron is picked up, full wave is restored for (normal power).

    An added non locking press button switch mounted in the iron handle, this boosts the power by connecting a 350V 10uF with a 22R in series (47uF/10R for 60W) housed in the stand (iron not earthed 3 core cable! Or use 4 core rubber flex with an earth) resulting in approx 300V peak DC from the mains being used for high power. This is approx 2x the normal power, hence the non locking press switch!

    Make sure all mains connections & switches are safe (properly shrouded heat- shrink) to avoid shocks etc.

    A neon (with series 220k) across iron can be used to indicate the power status.

    _._+340V _._ _._ _._ _..__ _..__
    / \ / \ / \ / \ / ' ' 0V.³.....³.......³ 0V.³.....³______³ 0V.³.....³³.....³ 0V...............
    ³ ³ ³
    NORMAL \_ _/ ECONOMY FULL POWER BOOST POWER
    MAINS ' -340 « POWER RAW DC SMOOTHED DC


    Also see my Tech Bul on "Thermostatic Soldering Iron LED".


    Why Don't U send an interesting bul?

    73 De John, G8MNY @ GB7CIP


    -----------------------------------------
    ARGEN-X BBS - IPV6 TELNET LU9DCE.DYNU.COM -----------------------------------------


    --- Mystic BBS v1.12 A48 (Linux/64)
    * Origin: ARGEN-X BBS (4:902/6)
  • From G8MNY@4:902/6 to WW on Wed Dec 11 05:59:32 2024

    To : TECH@WW

    By G8MNY (Updated Dec 04)
    (8 Bit ASCII graphics use code page 437 or 850, Terminal Font)

    Suitable for 15-60W mains irons only!

    ............S T A N D.................... ....I R O N.........

    Fuse ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
    L o-oÄÄ(ÄÄÄÄÂÄÄÄÄÄÄ¿ +³ 10uF 3 core Boost ³
    1A ³ _³_ _³_ === 350V cable Press SOLDERING
    ³ \_/ /_\ ÀÄÄÄÄÄÄÄ22RÄÄÄÄÄÄÄÄÄÄÄÄ> \ IRON
    ³ ³ ³ 1W ³ ELEMENT
    ÀÄÄÄÄ´ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÙ
    ³ Economize o ³ or 4 core
    4x ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄo <ÄÄÙ with earth
    1N4006_³_ _³_ Normal Gravity
    /_\ \_/ Switch
    N ÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÙ
    E -------------------------------------------------------------------

    When on the stand the mains fed to the iron is half wave only for economiser mode (1/2 power), the iron rest on a suitably mounted stand micro switch that is connected to one of the bridge diodes. When the iron is picked up, full wave is restored for (normal power).

    An added non locking press button switch mounted in the iron handle, this boosts the power by connecting a 350V 10uF with a 22R in series (47uF/10R for 60W) housed in the stand (iron not earthed 3 core cable! Or use 4 core rubber flex with an earth) resulting in approx 300V peak DC from the mains being used for high power. This is approx 2x the normal power, hence the non locking press switch!

    Make sure all mains connections & switches are safe (properly shrouded heat- shrink) to avoid shocks etc.

    A neon (with series 220k) across iron can be used to indicate the power status.

    _._+340V _._ _._ _._ _..__ _..__
    / \ / \ / \ / \ / ' ' 0V.³.....³.......³ 0V.³.....³______³ 0V.³.....³³.....³ 0V...............
    ³ ³ ³
    NORMAL \_ _/ ECONOMY FULL POWER BOOST POWER
    MAINS ' -340 « POWER RAW DC SMOOTHED DC


    Also see my Tech Bul on "Thermostatic Soldering Iron LED".


    Why Don't U send an interesting bul?

    73 De John, G8MNY @ GB7CIP

    -----------------------------------------
    ARGEN-X BBS - IPV6 TELNET LU9DCE.DYNU.COM -----------------------------------------

    --- Mystic BBS v1.12 A48 (Linux/64)
    * Origin: ARGEN-X BBS (4:902/6)